Sensor Cable Accessories -Turnbuckle, Eyebolt & Tensioning Wire

PR-008: Turnbuckle (ref: STT) / Eyebolt (ref: STE) + Tensioning Wire (ref "MW")

Certain applications - typically bulk warehouse protection - exist where regular fixing points for the linear heat sensor cable are not practical or possible. In such cases, the use of the Proline "TH" sensor cable with support wire (supplied on separate reel for on site installation around the sensor cable at a recommended 3 turns per metre) is recommended. The support wire is a flexible nylon covered stainless steel construction - 1.05mm diameter with strength - 90kgs. The Turnbuckle/eyebolt fixing will provide the required degree of tension on the sensor cable via the support wire. The maximum length between turnbuckles/ eyebolts - without intermediate support/s should not exceed 75metres. It is also recommended that intermediate supports be provided at maximum 15m intervals to eliminate excessive "sag" in the sensor cable when turnbuckles and eyebolts.